386.873.4610
2460 Old New York Ave., DeLand, FL 32720
Xpress has been building aluminum fishing and hunting boats for more than 50 years, and it was the first to build them all-welded, with no rivets. Here’s what goes into every one, and the questions to ask before you buy any aluminum boat.
Call us at 386-873-4610 or stop by the lot in DeLand to see the Xpress lineup in person.
These are the questions we’d ask about any aluminum boat, answered for an Xpress.
Aluminum is lighter, so a boat gets on plane quicker, runs shallower and tows easier with less horsepower. It also holds up to stumps, oyster bars and boat ramps, and it costs less to repair. An all-welded aluminum hull like Xpress builds gives you that toughness without the rivets that can work loose over time.
Xpress builds a boat for nearly every kind of Florida water. We stock bay boats for the flats and nearshore, a bass boat, crappie boats, a skiff for skinny water and a duck boat. Tell us where you fish and what you’re after, and we’ll point you to the right hull.
The Xpress models we stock run from 17 to 24 feet, rated from 90 to 300 hp. Bring us your usual crew, where you launch and what you tow with, and we’ll match the boat and the power to the way you use it. Xpress is partnered with Yamaha, so every Xpress comes with a Yamaha outboard.
Every Xpress hull is cut from 5052 marine-grade aluminum and welded into one solid unit, with no rivets or screws holding the hull together. Every void is filled with foam for strength and flotation. See “What goes into an Xpress” below for the full build.
Xpress covers the transom and hull seam welds for the lifetime of the boat, with a 5-year basic limited warranty on workmanship and materials. Both can be transferred to a second owner.* In the rare case you ever need it, our factory-certified technicians take care of Xpress warranty work right here in our shop.
Have a question we didn’t answer? Call us at 386-873-4610.
An aluminum boat lives a hard life: ramps, stumps, oyster bars and shallow water. Here’s how Xpress builds one to handle it.
All-welded, not riveted. Xpress was the first boat manufacturer to build all-welded aluminum boats. Every hull is welded into a single unit, with no rivets or screws holding it together.
5052 marine-grade aluminum. Every part is cut from 5052 aluminum alloy using computer-guided cutting, so each piece fits exactly before it’s welded.
Longitudinal ribs and a unibody build. Ribs that run the length of the hull add strength and help the boat perform, and the compartments and floor are built in to make one solid unibody structure.
Foam in every void. Expandable foam is injected into every open space in the hull, adding strength and flotation.
Hyper-Lift hull. Most of the Xpress models we stock ride on the Hyper-Lift hull, built for a quick holeshot and a smooth, dry ride.
Built by hand, checked twice. Skilled craftsmen and women weld every boat. Quality control checks each hull for smoothness before paint, and again after rigging. Paint is cured in temperature-controlled ovens.
A matching welded trailer. Every Xpress comes on a BackTrack trailer, which Xpress builds in-house, all-aluminum and all-welded, just like the boat.
Every Xpress we sell is rigged, inspected and delivered by our own factory-certified service team.
Questions about how an Xpress is built? Call us at 386-873-4610.
Lifetime coverage on the welds. Xpress covers the transom and hull seam welds for the lifetime of the boat.*
5-year basic limited warranty. Covers workmanship and materials for 5 years from the date of original purchase.*
Transferable. If you sell your Xpress, the lifetime coverage can be transferred once to the next owner during the 5-year basic warranty period, and the basic warranty can be transferred once during its first 2 years.*
Because every Xpress is welded into one solid unit with no rivets, it’s built to stay tight for years on the water.
And in the rare case your Xpress ever needs warranty work, our factory-certified technicians take care of it right here in our shop in DeLand.
*Limited warranty for recreational, non-commercial use. See the full Xpress warranty for terms and conditions; ask us for a copy.
Questions about the warranty? Call us at 386-873-4610.
Every Xpress shares the same all-welded aluminum build. Pick the hull and layout that fit how you fish or hunt. The models we stock:
H20 Bay: 20′ 3″. 95″ beam, 40-gallon fuel tank, rated up to 150 hp, holds 8 people. Hyper-Lift hull with a SeaDek console top, Humminbird graph, Minn Kota trolling motor, aerated livewell and two lockable rod boxes.
H22 Bay: 22′. 95″ beam, 40-gallon fuel tank, rated up to 200 hp, holds 8 people. The same Hyper-Lift bay layout with more room to fish.
H24 Bay: 24′. 95″ beam, 40-gallon fuel tank, rated up to 250 hp, holds 10 people. The biggest of the Hyper-Lift bay boats.
XR21B: 21′ 2″. 93″ beam, 36-gallon fuel tank, rated up to 200 hp, holds 7 people. Xpress’s premium bay boat, with a Humminbird Xplore 9 graph, Minn Kota Riptide 80 trolling motor, 10″ jack plate, SeaStar hydraulic steering and a floor reinforced for a T-top.
23 X-Bay Lounge: 23′. 102″ beam, 75-gallon fuel tank, rated up to 300 hp, holds 10 people. The widest and longest-range Xpress we stock, with a lounge console, fish box, removable windshield and eight rod holders.
H20 Bass: 20′. 93″ beam, 36-gallon fuel tank, rated up to 175 hp. Hyper-Lift hull with an expanded front deck, Humminbird graph, Minn Kota trolling motor and aerated livewell.
All three come with a Humminbird Helix 5, a Minn Kota trolling motor in a recessed foot well, an X-Wing console with tinted windshield, SeaDek decking and a two-bank battery charger.
H17C: 17′. 93″ beam, 18-gallon fuel tank, rated up to 90 hp.
H18C: 17′ 10″. 93″ beam, 18-gallon fuel tank, rated up to 115 hp.
H20C: 20′. 93″ beam, 36-gallon fuel tank, rated up to 175 hp. Adds a 6″ jack plate and hydraulic steering.
Skiff 185: 18′ 5″. 83″ beam, 18-gallon fuel tank, rated up to 115 hp, holds 4 people. Built for skinny water, with a 4″ hydraulic jack plate, leaning post, aerated livewell and Humminbird Helix 5 gauge.
X18DB: 18′ 10″. 88″ beam, built from .125″ 5052 aluminum, rated up to 90 hp, holds 5 people. A tiller-steer Hyper-Lift duck boat.
Looking for an Xpress we don’t stock? We can order other Xpress models. Call us and we’ll help you spec one.
H20 Bay: Starting at $37,995
H22 Bay: Starting at $45,995
H24 Bay: Starting at $48,495
XR21B: Starting at $66,495
23 X-Bay Lounge: Starting at $59,995
H20 Bass: Starting at $44,995
H17C: Starting at $33,395
H18C: Starting at $36,695
H20C: Starting at $45,995
Skiff 185: Starting at $34,995
X18DB: Starting at $29,995
Starting at prices are according to Xpress’s website, with the Yamaha outboard Xpress lists for each model, and are subject to change. Prices exclude freight, prep, dealer fee, registration and tax.
Want to know which Xpress boats are on the lot today? Call us at 386-873-4610.
The same boat can be a very different experience depending on who sells it to you and who takes care of it after.
Factory certified in every brand we sell. Our own technicians rig and deliver every Xpress we sell, and after the sale our service department handles maintenance, repairs and warranty work on everything we sell.
Full-service shop for the extras. Want upgraded electronics, a power pole, a T-top, upgraded audio or other accessories? Our service department can install the gear of your choice before delivery or anytime after, so your boat is set up exactly the way you fish or hunt.
Rigged right with Yamaha. Xpress is partnered with Yamaha, so every Xpress we sell comes with a Yamaha outboard, and we match the setup to how and where you run.
Volume pricing, passed on to you. As a volume stocking dealer, we buy more boats at a better cost, and we pass those savings on to our customers.
Boat show pricing, year-round. Whether you buy at a show or on our lot, you get boat show pricing every day of the year.
More than 500 five-star Google reviews. Don’t take our word for it. Read what our customers say about buying and boating with us.
A family business for more than 20 years. We’ve been helping Florida families get on the water for over two decades. With the next generation now working here too, we still treat every customer like they’re part of our family.
Florida owners, Florida water. We fish and boat here year-round, just like you, and we’ll set your Xpress up for the way Floridians use it.
Talk to our team: 386-873-4610.
Daytona Boat Show: January 15–17, 2027
Ocala Boat Show: February 19–21, 2027
Orlando Boat Show: March 12–14, 2027
We bring one of every Xpress model we have in stock to each show. Walk them side by side and find the one that fits how you fish or hunt.
Can’t make a show? You don’t have to. The lineup is on our lot, with no crowds and no ticket.
Yes. Every buyer gets an orientation test ride before they sign. We’ll show you how your Xpress handles and how everything works, so you know exactly what you’re getting.
We do our best to accommodate any time frame. Contact our team for full details.
Yes. We consider and take trade-ins. Bring your boat by or send us pictures, and we’ll give you a trade-in value.
Yes. We offer financing with extremely competitive terms. Ask our sales team for details.
We take you and your family out on the water and start from step one. We’ll teach you how to back up the trailer, take off the tie-down straps, power on the electronics and engine, operate the boat and all of its features, and load the boat back on the trailer. Then we complete all of the paperwork together, so you head home confident and ready to go.
Yes. We’re factory certified in every brand we sell, and our technicians handle maintenance, repairs and warranty work in our shop.
Still have questions? Call us at 386-873-4610.
The best way to choose an aluminum boat is to stand on one. Stop by the lot and walk the lineup.
Florida’s Family Marine
2460 Old New York Ave., DeLand, FL 32720
386-873-4610
Hours:
Monday–Friday: 8:30 a.m.–5:30 p.m.
Saturday: 8:30 a.m.–4:00 p.m.
Sunday: Closed
